您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 14805.8-2007 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号:4,语法发布号:1) 第8部分: 电子数据交换中的相关数据

作者:标准资料网 时间:2024-05-10 04:10:07  浏览:9102   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号:4,语法发布号:1) 第8部分: 电子数据交换中的相关数据
英文名称:Electronic data interchange for administration commerce and transport (EDIFACT)—Application level syntax rules(Syntax version number:4 Syntax release number:1)—Part 8:Associated data in EDI
中标分类: 电子元器件与信息技术 >> 信息处理技术 >> 信息处理技术综合
ICS分类: 信息技术、办公机械设备 >> 信息技术应用 >> 信息技术在运输和贸易中的
替代情况:替代GB/T 14805.8-1999
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2007-10-17
实施日期:2008-01-01
首发日期:1999-08-02
作废日期:
主管部门:国家标准化管理委员会
提出单位:中国标准化研究院
归口单位:全国电子业务标准化技术委员会
起草单位:中国标准化研究院
起草人:胡涵景、任冠华、刘颖、岳高峰、曹新九、章建方、孙文峰
出版社:中国标准出版社
出版日期:2008-01-01
页数:12页
计划单号:20062966-T-469
适用范围

本部分规定了在计算机应用系统之间交换的电子数据交换(EDI)中的相关数据的语法规则。这些规则为传送不能用批式或交互式EDIFACT报文承载的数据提供了一种方法。这些数据可以由其他应用生成(如STEP、CAD),并在本部分中称其为相关数据。

前言

没有内容

目录

前言Ⅰ ISO 前言Ⅱ 引言Ⅲ 1 范围1 2 一致性1 3 规范性引用文件1 4 术语和定义2 5 EDI交换中的相关数据2 5.1 批式EDI的结构2 5.2 交互式EDI的结构3 5.3 包的内容4 5.4 对象引用5

引用标准

下列文件中的条款通过GB/T14805的本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。
GB/T14805.1-2007 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号:4,语法发布号:1) 第1部分:公用的语法规则(ISO9735-1:2002,IDT)
GB/T14805.2-2007 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号:4,语法发布号:1) 第2部分:批式电子数据交换专用的语法规则(ISO9735-2:2002,IDT)
GB/T14805.3-2007 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号:4,语法发布号:1) 第3部分:交互式电子数据交换专用的语法规则(ISO9735-3:2002,IDT)
GB/T14805.10-2005 用于行政、商业和运输业电子数据交换的应用级语法规则 第10部分:
语法服务目录(ISO9735-10:2002,IDT)

所属分类: 电子元器件与信息技术 信息处理技术 信息处理技术综合 信息技术 办公机械设备 信息技术应用 信息技术在运输和贸易中的
下载地址: 点击此处下载
Product Code:SAE J2534
Title:Recommended Practice for Pass-Thru Vehicle Programming
Issuing Committee:Vehicle E E System Diagnostic Standards Committee
Scope:This SAE Recommended Practice provides the framework to allow reprogramming software applications from all vehicle manufacturers the flexibility to work with multiple vehicle data link interface tools from multiple tool suppliers. This system enables each vehicle manufacturer to control the programming sequence for electronic control units (ECU's) in their vehicles, but allows a single set of programming hardware and vehicle interface to be used to program modules for all vehicle manufacturers.This document does not limit the hardware possibilities for the connection between the PC used for the software application and the tool (e.g., RS-232, RS-485, USB, Ethernet...). Tool suppliers are free to choose the hardware interface appropriate for their tool. The goal of this document is to ensure that reprogramming software from any vehicle manufacturer is compatible with hardware supplied by any tool manufacturer.The U.S. Environmental Protection Agency (EPA) and the California Air Resources Board (ARB) have proposed requirements for reprogramming vehicles for all manufacturers by the aftermarket repair industry. This document is intended to meet those proposed requirements for 2004 model year vehicles. Additional requirements for the 2005 model year may require revision of this document, most notably the inclusion of SAE J1939 for some heavy-duty vehicles. This document will be reviewed for possible revision after those regulations are finalized and requirements are better understood. Possible revisions include SAE J1939 specific software and an alternate vehicle connector, but the basic hardware of an SAE J2534 interface device is expected to remain unchanged.【英文标准名称】:StandardTestMethodforSurfaceFlammabilityofFlexibleCellularMaterialsUsingaRadiantHeatEnergySource
【原文标准名称】:用辐射热源作软质多孔材料的表面可燃性的标准试验方法
【标准号】:ASTMD3675-2005
【标准状态】:现行
【国别】:美国
【发布日期】:2005
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:防火安全;泡沫橡胶;表面;试验
【英文主题词】:Firesafety;Foamedrubber;Surfaces;Testing
【摘要】:
【中国标准分类号】:Q10
【国际标准分类号】:13_220_40;83_100
【页数】:10P;A4
【正文语种】:英语